|
Adobe Acrobat is recommend
for proper viewing.
Tip #1
Basic installation instructions for qualified installers only.
Get them here (Size = 233KB)
Tip #2
The more flat the spider gear surface is, the better your unit will work.
Tip #3
Check springs for coil bind when using tuning shims.
Tip #4
Always check part # if your unit does not fit.
Tip #5
Check clearances between Phantom Grip & spider gears. .005 - .010 is the recommended amount.
Supplemental Instructions
Classic Mini
Merkur XRT4TI
VW 02A
VW 02O
Additional Tech Tips
1. Saturn Owners need to remove thrust washers.
2. Resurfacing may be needed if a raised lip is on the gear it will need to be removed
|
|
 |
Phantom Grips precision cut disc plates function as a disc-type limited slip in cornering and braking. Disc plates exert equal load against spider gears using spring pressure to control the amount of slippage at the wheels. Helping to accelerate quicker, while sustaining higher speeds through corners.
Phantom Grip offers 100% locking in hard acceleration. When torque is applied through acceleration the disc plates pivot, locking spiders, causing both wheels to exert equal power to the road, providing less torque steer than an ordinary differential. Although seemingly simple, the 'Phantom Grip design' offers as much maximum traction as other limited slips. The Phantom Grip is extremely strong and durable and comes with a Lifetime Warranty against manufacturer defects.
"Disclaimer of Warranty"---WARNING: Installation of any Phantom Grip component or kit should be performed by persons experienced in the installation and proper operation of transmission and drivetrain products. Purchasers expressly affirm they are relying upon their own skill or judgment to select and purchase Phantom Grip limited Slip conversion kits. Warranties are void against incorrect installation, or modifications done to Phantom Grip units.
Graphs
Left turn without unit installed
Left turn with unit installed
Straight with unit not installed
Straight with unit installed
|
